The VELETA garden gate with its graphic design will bring modernity and elegance to your entrance, courtyard,...
Description : Modern pedestrian gate with vertical decorative panel Material: Aluminium Colour: Anthracite grey (RAL 7016) Type of pattern : "Nature" Dimensions: Width 100 cm x Height 161 cm Required width between pillars: 103 cm Minimum height of pillars: 175 cm Inspired and designed in France
This do-it-yourself modern wicket gate kit with laser design contains : - 8 powder coated slats (Height 16 cm) - 1 reinforced powder coated slat for motorisation (Height 16 cm) - 1 decorative aluminium panel with "Nature" pattern (thickness 20/100) - 1 upper hinge - 1 bottom hinge - 1 reception stop - 1 sash lock - 1 double handles (Black colour) - Set of 5 keys - Finishing caps - Screws and bolts
If your installation requires pillars, Casanoov offers promotional packages in the "Side Gate" category. These packs contain one aluminium pedestrian gate of your choice, together with two aluminium posts to suit the chosen garden gate.
The VELETA model is also available in other sizes and colours. For a harmonious exterior, we propose matching swing gates, sliding gates and fences.
To further adapt your side gate to your project, all our wicket gates can be cut to width, for example for a narrower entrance. And for even more customisation, you can change the direction or position of the decorative plates.
Pedestrian gate delivered in kit form. Clear instructions, quick and easy assembly. You will find all the necessary information about this product in the technical data.
The EIFEL posts in thermo-lacquered aluminum have been specially designed for the installation of a swinging or sliding gate or even a gate.
Practical, the finishing cap of our EIFEL posts can be easily installed and removed to allow you to pass electrical wires in the event of motorization of your gate, gate or for the installation of motorization accessories (flash light, photocells, ...)
This EIFEL 15x15cm post with a height of 190cm is suitable for all aluminum gates and gates not exceeding 180cm in height.
Colours: Anthracite gray (RAL 7016) Material: Aluminum Post height: 1.90 m Post section: 15 x 15 cm Section of the patina: 20 x 20 cm Installation method: To screw or seal Maximum height of the gate to be installed: 180cm
Accessories included: - Plastic finishing cap with fixing screws (Anthracite grey) - Expansion bolts (for floor fixing)
Advice :
Weight of the gate less than 80kg: You can fix your post by screwing the post fixing plate to the ground (bolts included in our kits) *
Weight of the gate greater than 80 kg: It is recommended to concrete and steel the EIFEL post in order to consolidate it (see technical diagram).
* In the case of hollow posts, we advise you to fix the plate using 10x120mm anchoring studs, for a stronger and more secure fixing. In the case of concrete posts, you can completely fix your post using the bolts included in our kits
Compatible with all CASANOOV gates and gates of height 160 and 180 cm The EIFEL 15x15cm post is available in a height of 166cm and in a matt white color Also available in section: 10x10cm; 20x20cm
If your installation requires several posts, you will find in the "Gate Accessories" category promotional offers in the form of a set of 2 or 4 EIFEL posts of your choice.
Clear instructions, simple and quick assembly. Find all the necessary information about this product in the technical characteristics.
Technical drawings
Side gate 1m VELETA H.160cm grey aluminium
Side gate 1m VELETA H.160cm grey aluminium
Aluminium Post 15x15 EIFEL H.190cm - Anthracite Grey
Assembly instructions - KIT-000049
