Swing gate automation TANKER B350
- Kit complet Linear actuator motor 24V
- Gate weight Up to 700kg
- Multiple operating modes
- For aluminum, wood, PVC, and iron gates
By validating your purchases, you will be debited for the amount of your order
Preordering
Total before discount
€
Discount
- €
Code
- €
Total to pay (incl. VAT)
€
or
Save 38 €
Save 38 €
-5%
between 0 € and 1499.99 €*
-7%
between 1500 € and 2999.99 €*
-10%
greater than 3000 €*
*HT orders
Housing size
25,5 x 18 x 8 cm
Type of mechanism
Cylinder casement
Compatible for portals
Aluminium, pvc, wood, iron
Power
24 V
Supply voltage
220VAC±10%/110VAC±10%
Power consumption
80 W
Amperage
--
Nominal operating thrust
3000 Nm
Maximum thrust
3500 Nm
Arm rotation speed in revolutions per minute
350 tr/min
Housing size
25,5 x 18 x 8 cm
Type of mechanism
Cylinder casement
Compatible for portals
Aluminium, pvc, wood, iron
Power
24 V
Supply voltage
220VAC±10%/110VAC±10%
Power consumption
80 W
Amperage
--
Nominal operating thrust
3000 Nm
Maximum thrust
3500 Nm
Arm rotation speed in revolutions per minute
350 tr/min
Arm speed in centimeters per second
2.4 cm/s
Opening time
about 13 seconds.
Maximum size per fan
3 m
Maximum weight per fan
350 kg
Gate weight up to
700 kg
Engine rain protection
IP55
Operating temperature
-45°C to +50°C
Minimum opening angle
90 °
Maximum opening angle
120 °
Length of the closed arm
85 cm
Length of open arm
107 cm
Manual release
Yes
Automatically programmable closing after opening
Yes
Gradual opening / closing
Yes
Adjustment of the opening and closing speed
Yes
Co-ownership mode
Yes
Obstacle detection
Yes
Partial pedestrian opening
Yes
Photocell Compatible
Yes
Flashing light compatible
Yes
External battery compatible
Yes
Keyboard compatible
Yes
Key lock compatible
Yes
Number of remote controls included
2
Number of remote control keys
4
Maximum number of associable remote controls
30
Electronic cabinet with electronic board
Includes
Pole mounting brackets included
Yes
Gate mounting brackets included
Yes
Mounting accessories included
Yes
Central gate stop included
Yes
Screws included
Yes
Infrared photocells included x2
Yes
LED flashing light included
Yes
Gross weight
23 kg
Assembly instructions
Yes
Assembly time
4 h
Recommended number of persons for assembly
2
Warranty
2 an(s)
Eligibility Extended warranty 5 years
No
Eligibility Extension of warranty 10 years
No
Weight of package No.1
24.0 kg
The Tanker B350 complete piston swing gate motorization kit is compatible with all iron, aluminum, PVC, and wood swing gates.
With this motorization, you can motorize your gate up to 350 kg per leaf and up to 3.00 m per leaf.
This kit includes:
- 2 motors with an electrical voltage of 24V / 80W
- A control box
- A central gate stop
- 2 pillar mounting brackets allowing for multiple opening angle configurations.
- 2 mounting brackets to attach your motor to your swing gate. - 2 4-button remote controls with included batteries and protective cover
- 1 3W LED flashing light (equivalent to 30W for an old-generation incandescent bulb) with the following specifications:
- Operating voltage: 12-265 VAC/DC
- Charging capacity: < 3 W
- Flashing frequency: 1 Hz
- Operating temperature: -20°C ~ +60°C
- IP rating: IP54
- 1 pair of infrared photocells with the following specifications:
- 'Transmitter' photocell
- 'Receiver' photocell
- Black ABS material
- Infrared with anti-glare 50,000 LUX
- A set of screws to attach your motor to your posts, the control box, and the base plate.
Accessories not included with the B250 motor:
Screws to attach the motor to the gate.
These screws must be adapted to each gate type and depend on the thickness of your gate.
For Casanoov Swing gates, we recommend attaching your motor arms with Rivkle blind rivets between 8 and 12 mm long. The mounting bracket must be positioned on the reinforced slats provided for this purpose on all our swing gates and wickets.
Features of the Tanker B250 motor:
- Inward and outward opening.
- Opening angle between 90° and 120°.
- The opening angle is determined by your installation requirements (you will find all the installation instructions in the instructions, which can be downloaded freely from the product page).
- Quick manual key release of the motor in the event of a power outage. - Retracted product length: 85 cm.
- Open product length: 107 cm. The working arm length is 300 mm.
- The internal rotation speed is 350 revolutions per minute.
- Arm opening speed up to 2.4 cm/second, or approximately 13 seconds.
- Opening performance can be varied using the soft open and close mode.
- The opening and closing speed, as well as the drive force, can be adjusted to 20 different positions.
- After opening, the gate can close automatically according to your chosen time interval, ranging from 0 to 99 seconds.
- You can choose to open only one of the two leaves (pedestrian mode).
- Rain protection class: IP 55.
- The weight of the two motors is approximately 23 kg.
- Operating temperature: -45° to +50°
- Thrust force: 3000 N and maximum force: 3500 N. Electrical connection power between your home and the motor: 20VAC ±10%/110VAC ±10%.
- Auto-stop function: When your gate encounters an obstacle, the gate automatically stops opening or closing.
You can add external accessories with a 24V operating power, such as a backup battery, magnetic or electric lock, or push button.
The stopper should be used if you have an automatic mechanical stop. When motorizing your swing gate, you must ensure that the central stopper does not hold your gate. Your swing gate motor will secure your entrance.
Installation tips:
Always check that your installation distances are included in the installation table. Installation distances determine the opening angle of your gate.
Our Casanoov technical team is here to assist you.