Discover our VOGEL openwork sliding gate in aluminium, the perfect combination of aesthetics and security for your entrance.
Thanks to its length of 4.5 metres, it is ideal for large entrances, guaranteeing easy access and secure parking for your vehicles.
Its timeless elegance fits perfectly into any environment, creating a memorable first impression.
Its spaced slats allow you to gain visibility and let natural light through to illuminate your entrance, while protecting you from prying eyes.
Ideal for areas exposed to wind, its openwork structure allows air to circulate freely, thus reducing wind resistance and minimising the constraints imposed by bad weather.
Opting for an openwork sliding gate means choosing security, style and durability, while preserving the visual harmony of your outdoor space.
The VOGEL XL sliding gate with its contemporary design is ideal for areas exposed to wind.
Description: Large openwork sliding gate, 1 leaf Material: Aluminum Color: Anthracite gray RAL 7016 Dimensions: Width 449 cm x Height 165 cm Total width required with clearance: 898 cm Minimum height of pillars: 175 cm Inspired and designed in France
If you wish to motorize your sliding gate, promotional packs are available under this product sheet. The posts are not included in our kits because they are not essential for the installation of your sliding gate in the event that your exterior already has pillars/posts.
To ensure a safe and stable installation of the sliding gate, the posts must have a minimum height of 175 cm and a width of at least 20 cm.
If your installation requires pillars, we offer promotional packs including the XL sliding gate of your choice, accompanied by two aluminum posts adapted to the chosen entrance gate.
The VOGEL XL model is also available in other dimensions.
Gate delivered in kit form. Clear instructions, simple and quick assembly. Find all the necessary information for this product in the Technical characteristics
It is technically possible to mount your gate with an opening from right to left. Our sliding gate assembly instructions have been designed to offer you two different installation options depending on the opening direction chosen: from left to right or from right to left (finishing strip on the outside). For any further information, please contact our customer service via our contact form.
The TANKER C600 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate. This rack-and-pinion motor is suitable for all types of sliding gates that can be motorized. Whether for PVC, wood, aluminum, or iron sliding gates, this automatic system can be installed on all models weighing less than 600 kg.
Here are the main technical specifications of the motor:
Motor voltage: 230V – 370W Input power: 220VAC±10%/110VAC±10% Frequency: 50Hz/60Hz Gear module: M4 Z=16 teeth Output torque: 30.0 Nm Nominal rotation speed: 14,000 rpm Maximum gate weight: 600kg on level ground Magnetic start and end stops Environmental temperature: -25°C ~ +55°C Protection class: IP55 Opening speed: approximately 12 meters per minute Maximum force: 1100N Nylon rack Control card included with the motor.
Accessories included:
- Two 4-button remote controls with protective cover. Batteries are included. - Nylon rack (4m – 12 pieces of 33cm) - Installation and setup manual - 2 quick release keys in case of power outage 1 pair of infrared photocells with the following characteristics: - 'Transmitter' photocell - 'Receiver' photocell - Black ABS material - Infrared with anti-glare 50,000LUX 1 flashing LED light with a power of 3W (equivalent to a power of 30W for an old-generation incandescent bulb) with the following characteristics: - Operating voltage: 12-265 VAC/DC - Load capacity: < 3W - Flashing frequency: 1Hz - Operating temperature: -20°C ~ +60°C - IP rating: IP54
Tanker C600 motorization features : - Opening according to your choice: left to right (factory mode) or right to left. - Automatic closing: After opening, the gate will automatically close after 0, 10, 30, or 60 seconds, depending on your choice. - Pedestrian mode: The gate opens only partially and then closes after 0, 5, 10, or 30 seconds. - Condominium mode: This mode allows you to reduce settings and configure up to 50 remote controls. Each remote control will control: button 1 (gate opening), button 2 (gate stopping), button 3 (gate closing), and button 4 (pedestrian mode). Each remote control will operate in the same way. - Adjustable opening and closing sensitivity: Depending on your environment, you can adjust the opening and closing power. - Manual gate unlocking. With the included key, you can disengage the opening of your gate and operate it manually. - Auto-stop. The gate stops if it encounters an obstacle. - The motor cannot be connected to a backup battery. In the event of a power outage, manual unlocking with two keys (included) is possible. This disengages the motor's output pinion and allows you to operate your gate freely.
You can pair this motor with photocells, a flashing light, and an opening push button. Be sure to check the electrical compatibility (voltage in Volts) of your existing accessories if they are not from our website. All our accessories are compatible with all our motors.
Installation Tips:
To successfully connect and configure your motor, proceed step by step and check that it is working properly between each step. If you pair accessories with your C600 motor, check each time that your motor is in working order. Finally, ensure that your electrical connection is properly wired. This will help you operate your installation and prevent electrical leaks. Our Casanoov technical team is here to assist you if needed.
Assembly instructions - KIT-000548
