- This electric gate package contains:
- Solid Anthracite grey aluminium swing gate ALPIS
- Width: 300cm and Height: 160cm
- Cylinder motorisation up to 700kg
Motorised swing gate 3m solid ALPIS H.160cm aluminium Anthracite grey + Tanker B700 motorisation
PAC-005130
1868 €TVA 10% ✓
- This electric gate package contains:
- Solid Anthracite grey aluminium swing gate ALPIS
- Width: 300cm and Height: 160cm
- Cylinder motorisation up to 700kg
Secure payment
Delivery within 5 days
Free shipping
Motorised swing gate 3m solid ALPIS H.160cm aluminium Anthracite grey + Tanker B700 motorisation
1868 €
-5%
between 0 € and 1499.99 €*
-7%
between 1500 € and 2999.99 €*
-10%
greater than 3000 €*
*HT orders
Description
Hinged gate 3m full ALPIS H.160cm aluminium Anthracite grey
Looking for an aluminium hinged gate to secure the entrance to your property? The ALPIS gate, 3 m wide and 160 cm high, provides access suitable for vehicle passage. Its full format, XL blades and Anthracite grey finish give it a modern and clean design.
…Swing gate automation TANKER B700
The TANKER B700 actuator is ideal for motorizing swing gates up to 6 meters long and weighing up to 700 kg (i.e., 3 meters and 350 kg maximum per leaf).
Specially designed for swing gates, this actuator allows you to motorize any type of …
Hinged gate 3m full ALPIS H.160cm aluminium Anthracite grey
Looking for an aluminium hinged gate to secure the entrance to your property? The ALPIS gate, 3 m wide and 160 cm high, provides access suitable for vehicle passage. Its full format, XL blades and Anthracite grey finish give it a modern and clean design.
A full gate to enclose your property
The ALPIS hinged gate consists of two panels and offers a passage Width of 3 m. It allows you to enclose your property and control its access. The blades are placed against each other to form a solid and continuous surface. This full design of the gate and its Height of 1m60 help limit visibility from the outside and create a separation from the street or neighbouring properties.
The wide XL blades give the gate clean and contemporary lines. Their Anthracite grey colour is combined with a sanded matte finish that adds a subtle textured effect to the aluminium, with no glossy appearance.
Designed for outdoor installation, the ALPIS gate resists winds of up to 90 km/h. Its installation requires posts or pillars of at least 180 cm high to ensure appropriate fixing.
If you wish to motorise your gate, two reinforced aluminium blades are provided. They can be placed in one blade of each gate panel to reinforce the locations intended for fixing the motor arms.
Why choose a hinged gate?
The hinged gate is suitable for entrances with sufficient Depth to allow both panels to open. It also has the advantage of requiring neither ground rail nor lateral recess space, unlike a sliding gate. Its installation therefore requires less preparatory work at the entrance.
Material: Thermolacquered aluminium certified QUALICOAT
Colour: Anthracite grey RAL 7016 sanded matte finish
Dimensions: Width 300 cm x Height 160 cm
Space between posts: 302.5 cm to 308.3 cm
Minimum Height of posts: 180 cm
Wind resistance: up to 90 km/h
Precautions during Assembly
When assembling the finishing blades, we recommend placing a protection, such as a soft cloth or piece of cardboard, between the mallet and the gate to avoid any direct contact. This precaution helps limit the risk of Scratches or damage to the Upholstery.
- 2 reinforced blades for motorisation
- 2 upper hinges mounted on ball bearings
- 2 lower hinges
- 1 central stop
- 2 reception stops
- 1 barrel lock
- 1 Handle
- 3 keys
- Finishing caps
- Screws
About aluminium
Thermolacquered aluminium is particularly suitable for outdoor equipment exposed to the weather. It does not rust and resists moisture as well as temperature variations. Unlike Wood which requires regular treatments, or PVC which can deteriorate over the years, a thermolacquered aluminium gate durably maintains its appearance while requiring minimal Care.
Qualicoat certified thermolacquering
The ALPIS gate benefits from QUALICOAT certified thermolacquering, a label that attests to the quality of the finish applied to the aluminium. This certification helps ensure good colour retention and Upholstery performance against external conditions. Your Anthracite grey gate thus retains its appearance and finish more durably, while requiring minimal Care.
How to care for your aluminium gate?
Aluminium requires little Care, but regular Cleaning extends its lifespan. Once or twice a year, simply use lukewarm soapy Water with a soft cloth, then rinse and dry thoroughly. Avoid abrasive products and high-pressure Cleaning, which could damage the lacquer.
Need help choosing your aluminium gate?
Contact our customer service, our team is at your disposal to advise you.
For this product
Clear instructions
Quick and easy assembly
Find all the necessary information about this product in the Technical specifications
Download the instructionsSwing gate automation TANKER B700
The TANKER B700 actuator is ideal for motorizing swing gates up to 6 meters long and weighing up to 700 kg (i.e., 3 meters and 350 kg maximum per leaf).
Specially designed for swing gates, this actuator allows you to motorize any type of swing gate, whether new or existing, made of iron, aluminum, PVC, or wood.
Its understated design allows you to benefit from an easy-to-use electric gate with substantial power, without distorting the aesthetics of your gate or detracting from your exterior.
This actuator consists of two actuator arms, each designed to motorize one leaf of your gate.
The pistons located inside the actuators extend to close the gate and retract to open it.
Supplied with clear and detailed installation instructions, you can motorize your gate quickly and easily!
Our installation instructions have been designed to guide you step by step through the proper operation of your automation system, using clear instructions accompanied by illustrations to facilitate your understanding.
If you need help or encounter any difficulties, our Casanoov technical team is here to assist you.
- 2 motors with an electrical voltage of 24 Volts / 80 Watts
- A control box
- A central gate stop
- 2 post mounting brackets allowing for multiple opening angle configurations
- 2 mounting brackets to attach your motor to your swing gate
- 2 4-button remote controls with protective cover (batteries included)
- Hardware to attach the motor to your posts
Accessories included with the B700 motor:
- 1 flashing LED light with a power of 3 Watts (equivalent to a 30W power for an old-generation incandescent bulb)
- 1 pair of infrared photocells including: 'Transmitter' photocell and 'Receiver' photocell
Accessories not included with the B700 motor:
Screws to attach the motor to the gate.
These screws must be adapted to each type of gate and chosen according to the thickness of your gate.
For Casanoov Swing gates, we recommend attaching your motor arms with Rivkle blind rivets between 8 and 12mm long. The mounting bracket must be positioned on the reinforced slats provided for this purpose on all our swing gates and wickets.
The stop is to be used if you have a swing stop for manual gates. When you motorize your swing gate, you must ensure that the central stop does not hold it back. Your motor will lock and secure your swing gate.
Features of the TANKER B700 motor:
- Inward and outward opening
- Opening angle up to 120°
- The opening angle is determined by your installation requirements (You will find all the installation instructions in the instructions, which can be downloaded freely from the product page)
- Manual motor release in the event of a power outage
- Retracted product length: 86.8 cm
- Open product length: 121.8 cm. The working arm length is 46.7 cm
- The internal rotation speed is 350 revolutions per minute, nearly 60% faster than the B150 model! - Arm extension speed: 2.4 cm/second
- Opening performance can be varied using the soft open and close mode
- The opening and closing speed, as well as the drive force, can be adjusted to 20 different positions. - After opening, the gate can close automatically according to your chosen time interval between 0 and 99 seconds.
- Pedestrian mode: You can choose to open only one of the two leaves.
- Rain protection class: IP 55.
- Motor weight: 23 kg.
- Operating temperature: -45°C to +50°C.
- Thrust force: 1090 N and maximum force: 1110 N.
- Electrical connection between your home and the motor: 20 VAC ± 10%/110 VAC ± 10%.
- Auto-stop function: If your gate encounters an obstacle, the gate automatically stops opening or closing.
You can combine external accessories with a 24V operating power, such as a backup battery, magnetic or electric lock, or push button.
Installation tips:
Always check that your installation distances are included in the installation table. Installation distances determine the opening angle of your gate.
Our Casanoov technical team is here to assist you.
For this product
Clear instructions
Quick and easy assembly
Find all the necessary information about this product in the Technical specifications
Download the instructionsTechnical data
-
Type of filling
Full
-
Available in sliding
No
-
Compatible engines
Yes
-
Width
301 cm
-
Height
170 cm
-
Top cover cap
Yes
-
Frame material
Aluminium
-
Width between pillars
302.5 cm
-
Minimum pillar height
180 cm
-
Operating clearance
33 mm
-
Pivoting system
Ball bearing
-
Blade section
496.6*20 mm
-
Amounts Section
80*45 mm
-
Locking system
Barrel lock
-
Handle material
Aluminum
-
Handle colour
Black
-
Type of lock
3 keys
-
Supplied accessories
Yes
-
Number of upper hinges
2
-
Number of lower hinges
2
-
Central stop
No
-
End stop
2
-
Wind resistance
90 km/h
-
Assembly instructions
Yes
-
Assembly time
4 h
-
Recommended number of persons for assembly
2
-
Warranty
2 an(s)
-
Compatible pillar spacing
303.5 - 306.8 cm
-
Main material
Aluminum
-
Colour
Charcoal grey
-
RAL
7016
-
Finishing
QUALICOAT
-
Opening system
Swing gate
-
Eligibility Extension of warranty 10 years
No
-
Opening direction
To the house
-
Stud/rail assembly
Self-drilling screws
-
Thickness of the blades
1.2 mm
-
Stud thickness
2 mm
-
Eligibility Extended warranty 5 years
No
-
Adjustment of the opening and closing speed
Yes
-
Maximum number of associable remote controls
30
-
Key lock compatible
Yes
-
Obstacle detection
Yes
-
Assembly time
4 h
-
Warranty
2 an(s)
-
Flashing light compatible
Yes
-
External battery compatible
Yes
-
Photocell Compatible
Yes
-
Arm speed in centimeters per second
2.4cm/s
-
Keyboard compatible
Yes
-
Maximum size per leaf
3 m
-
Operating temperature
-45°C à +50°C
-
Maximum opening angle
110 °
-
Length of open arm
121,8 cm
-
Infrared photocells included x2
Yes
-
Housing size
25,5 x 18 x 8 cm
-
Maximum thrust
3500 Nm
-
Engine rain protection
IP55
-
Recommended number of persons for assembly
2
-
Co-ownership mode
Yes
-
Gradual opening / closing
Yes
-
Power consumption
80 W
-
Minimum opening angle
90 °
-
Number of remote control keys
4
-
Number of remote controls included
2
-
Power
24 V
-
Gross weight
23 kg
-
Eligibility Extension of warranty 10 years
No
-
Compatible for portals
Aluminum, pvc, wood, iron
-
Supply voltage
220VAC±10%/110VAC±10%
-
Central gate stop included
Yes
-
Partial pedestrian opening
Yes
-
Gate weight up to
700 kg
-
Manual release
Yes
-
Opening time
about 14 seconds.
-
Arm rotation speed in revolutions per minute
350 tr/min
-
Maximum weight per fan
350 kg
-
Length of the closed arm
86,8 cm
-
Electronic cabinet with electronic board
Includes
-
Gate mounting brackets included
Yes
-
Nominal operating thrust
3000 Nm
-
Amperage
5,5 A
-
Automatically programmable closing after opening
Yes
-
Mounting accessories included
Yes
-
LED flashing light included
Yes
-
Eligibility Extended warranty 5 years
No
-
Pole mounting brackets included
Yes
-
Type of mechanism
Cylinder casement
-
Assembly instructions
Yes
-
Screws included
Yes
-
Required pillar section
15*15 cm
Customers' opinion
Questions from our customers
All our products are delivered in kit form and to be assembled by you.
We have designed and imagined our products so that they are easy to assemble, and your customer experience is pleasant.
We have provided you with clear assembly instructions that you can download.
All the accessories necessary for the installation of your portal are provided to you, and everything that is included in our portals is specified in the technical characteristics of the product as well as in the description.
You can find all this information on each of our product sheets through these different tabs:
- In the “Technical characteristics” tab
- In the “Technical drawing” tab
- In the “Assembly instructions” tab
If, upon receipt and assembly of your products, you have any questions about the installation, you can always contact us through the Casanoov contact form.
For orders where all products are advertised as "In stock", we do our best to prepare your order in less than 24 hours.
Delivery times are communicated to you on each of our product sheets.
- To do this, look for the model you want, you will then find its product sheet:
- The delivery time will be notified directly on the product sheet, next to the add to cart button
For orders with products "in reservation", preparation and delivery take place at the time of the effective return to stock.
We offer you in full consciousness a longer delivery time to allow you to receive your entire order in a grouped manner.
You are advised to place two different orders if you wish to receive the products in stock more quickly and place a second order with the products for which we are awaiting stock.
Our delivery costs are free, so this will have no impact on your final cost.
You can contact us via the contact form, section "Question about a product". We will do our utmost to provide you with all the help you need and to answer your questions about our articles.
A Question/Answer system will be set up very quickly on each of our products so that your questions can also help the Casanoov community in their choice!
All our products have a 2-year commercial warranty.