Need a sturdy and elegant sliding gate to guarantee complete privacy? Discover our EIGER range.
Discover the EIGER solid sliding gate, specially designed to offer maximum protection thanks to its solid and elegant design. The horizontal slats create a sturdy barrier while maintaining a modern and sleek aesthetic. Perfect for ensuring complete privacy, this sliding aluminum gate combines strength and elegance, providing enhanced security to your outdoor space while enhancing its contemporary style.
Sliding Gate: Suitable for large openings and difficult terrain
The sliding gate is designed to adapt to a wide variety of configurations, including sloping entrances or tight spaces. With a side opening, it allows for optimal space savings while facilitating vehicle access. Our sliding gates offer great durability with minimal maintenance. By adding a sliding gate motor, you benefit from full automation, making the use of your motorized sliding gate even more convenient and seamless on a daily basis.
This sliding gate has a wind resistance of 50 km/h.
Material: Aluminum Color: Anthracite Gray - RAL 7016 Dimensions: Width 390 cm x Height 163 cm Total width required with clearance: 832 cm Minimum pillar height: 175 cm Inspired and designed in France
Aluminum is attractive for its lightness and ease of use, making it easy to install on all types of terrain. A modern material, it offers a wide range of designs and colors to complement your exterior. Resistant to impacts and climatic variations, it remains intact over time. By choosing aluminum, you benefit from a versatile, customizable, and durable design to enhance your outdoor space.
Need posts?
Our kits are sold without posts, as they are not essential if you already have pillars or supports suitable for installation. If you need them, discover our promotional packs that include the product of your choice and its matching posts. To ensure a safe and stable installation of your sliding gate, the posts must be at least 175 cm high and at least 15 cm wide.
How to maintain your aluminum product?
Aluminum requires very little maintenance. To maintain its shine and durability, clean it once or twice a year with warm, soapy water and a soft cloth. Rinse and dry thoroughly, and avoid abrasive products or high-pressure cleaning, which could damage the powder coating.
Need help choosing your sliding gate? Contact our customer service via our online form.
The TANKER C600 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate. This rack-and-pinion motor is suitable for all types of sliding gates that can be motorized. Whether for PVC, wood, aluminum, or iron sliding gates, this automatic system can be installed on all models weighing less than 600 kg.
Here are the main technical specifications of the motor:
Motor voltage: 230V – 370W Input power: 220VAC ±10%/110VAC ±10% Frequency: 50Hz/60Hz Gear module: M4 Z=16 teeth Output torque: 30.0 Nm Nominal rotation speed: 14,000 rpm Maximum gate weight: 600kg on level ground Magnetic start and end stops Environmental temperature: -25°C ~ +55°C Protection class: IP55 Opening speed: approximately 12 meters per minute Maximum force: 1100N Nylon rack Control card included in the motor.
This kit contains: - 1 motor - 2 4-button remote controls with protective cover. Batteries are included. - Nylon rack (4m – 12 pieces of 33cm) - Installation and setup manual - 2 quick release keys in case of power outage - 1 pair of infrared photocells with the following features: - 'Transmitter' photocell - 'Receiver' photocell - Black ABS material - Infrared with anti-glare 50,000LUX - 1 3W LED flashing light (equivalent to 30W for an old-generation incandescent bulb)
The flashing light has the following specifications: - Operating voltage: 12-265 VAC/DC - Charging capacity: < 3 W - Flashing frequency: 1 Hz - Operating temperature: -20°C ~ +60°C - IP rating: IP54
Tanker C600 motor features: - Opening according to your choice: left to right (factory mode) or right to left. - Automatic closing: After opening, the gate will automatically close after 0, 10, 30, or 60 seconds, depending on your choice. - Pedestrian mode: The gate opens only partially and then closes after 0, 5, 10, or 30 seconds. - Condominium mode: This mode allows for reduced settings and the configuration of up to 50 remote controls. Each remote control will control: button 1 (gate opening), button 2 (gate stopping), button 3 (gate closing), and button 4 (pedestrian mode). Each remote control will operate in the same way. - Adjustable opening and closing sensitivity: Depending on your environment, you can adjust the opening and closing power. - Manual gate release. With the included key, you can disengage the opening of your gate and operate it manually. - Auto-stop. The gate stops if it encounters an obstacle. - The motor cannot be connected to a backup battery. In the event of a power outage, manual release with two keys (included) is possible. This disengages the motor's output pinion and allows you to operate your gate freely.
You can combine this motor with photocells, a flashing light, and an opening push button. Be sure to check the electrical compatibility (voltage in Volts) of your existing accessories if they are not from our website. All our accessories are compatible with all our motors.
Installation Tips:
To successfully connect and configure your motor, proceed step by step and check that it's working properly between each step. If you're adding accessories to your C600 motor, check that your motor is working properly each time. Finally, make sure your electrical wiring is clean. This will help you with your installation and prevent electrical leaks. Our Casanoov technical team is here to assist you if needed.
Assembly instructions - KIT-000033
